manufacturer category series package voltage class rev . date ecliptek corp. oscillator eps13d2 ceramic 3.3v os2g 09/04 eps13d2 series oscillator eps13d2 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. ? rohs compliant (pb-free) eps ? spread spectrum programmable clock oscillators ceramic 4-pad smd package low emi lvhcmos output 3.3v supply voltage stability to 100ppm center spread and down spread modulation tri-state and power down options available available on tape & reel h 1.6 l 7.0 w 5.0 14.318mhz to 166.000mhz -20c to 70c -55c to 125c 3.3v dc 0.3v dc -0.5v dc to 7.0v dc 30ma maximum 100ppm maximum v dd -0.4v dc minimum 0.4v dc maximum 2.7nseconds maximum 50 10(%) 50 5(%) 15pf hcmos load maximum tri-state or power down enables output enables output disables output: high impedance 350nsec maximum 3msec maximum 50a maximum 350nsec maximum 350nsec maximum 20ma maximum center spread down spread 30khz minimum, 31.5khz typical, 33khz maximum 700psec maximum < 25.000mhz 400psec maximum 25.000mhz to 133.000mhz 300psec maximum > 133.000mhz 5ppm maximum 10msec maximum nominal frequency operating temperature range storage temperature range supply voltage (v dd ) maximum supply voltage input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability output control function tri-state/power down input voltage power down output disable time power down output enable time standby current tri-state output disable time tri-state output enable time disable current spread spectrum percentage modulation frequency period jitter aging start up time unloaded; v dd = 3.3v dc inclusive of all conditions: frequency stability over the operating temperature range, supply voltage change, output load change, 1st year aging at 25c, shock, and vibration i oh = -8ma i ol = +8ma 20% to 80% of waveform at 50% of waveform internal pull down resistor of 100kohms typical on pad 3, internal pull up resistor of 100kohms typical on pad 1 v ih of 70% of v dd minimum no connection v il of 30% of v dd maximum unloaded; pad 1 = ground; v dd = 3.3v dc unloaded; pad 1 = ground; v dd = 3.3v dc 0.25%, 0.50%, 0.75%, 1.0%, 1.5%, 2.0% -0.50%, -1.0%, -1.5%, -2.0%, -3.0%, -4.0% cycle to cycle; spread spectrum-on; v dd = 3.3v dc first year at 25c
manufacturer category series package voltage class rev . date ecliptek corp. oscillator eps13d2 ceramic 3.3v os3g 09/04 mechanical dimensions all dimensions in millimeters environmental/mechanical specifications marking specifications tape and reel dimensions all dimensions in millimeters suggested solder pad layout all dimensions in millimeters 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. eps13d2 c 1 h a - 44.736m tr part numbering guide available options blank=tubes tr=tape and reel (standard) frequency spread spectrum percentage a = 0.25% center spread g = -0.50% down spread b = 0.50% center spread h = -1.00% down spread c = 0.75% center spread j = -1.50% down spread d = 1.00% center spread l = -2.00% down spread e = 1.50% center spread n = -3.00% down spread f = 2.00% center spread p = -4.00% down spread frequency tolerance & stability/ operating temperature range c=100ppm maximum over -20c to +70c duty cycle 1=50% 10%, 2=50% 5% logic control/additional output h=tri-state j=power down a b c d e f 16.3 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a tolerances= +0.1 characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215 pin 1: tri-state or power down pin 2: case ground pin 3: output pin 4: supply voltage line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: s xx y zz week of year last digit of year ecliptek manufacturing identifier configuration designator
|